Setting the clock

1 Press ?/1 to turn on the system.2 Press CLOCK/TIMER SET on the remote.3 Press . or > on the remote repeatedly to set the hour.4 Press ENTER on the remote.

The minute indication flashes.

5 Press . or > on the remote repeatedly to set the minute.6 Press ENTER on the remote.

The clock starts working.

To adjust the clock

1Press CLOCK/TIMER SET on the remote.

2Press . or > on the remote to select “CLOCK SET”, then press ENTER on the remote.

3Do the same procedures as step 3 to 6 above.

Note

The clock settings are canceled when you disconnect the power cord or if a power failure occurs.

CD

Loading a CD

1 Press Z OPEN/CLOSE.

The disc tray opens.

2 Place a CD with the label side up on the disc tray.

When you play a CD single (8 cm CD), place it on the inner circle of the tray.

To insert additional discs, press DISC SKIP/EX-CHANGE to rotate the disc tray.

3 Press Z OPEN/CLOSE to close the disc tray.

10GB