Display
Turning off the display
— Power Saving Mode
Even if the system is off, the system consumes power to display the clock and to stay responsive to commands from the remote. Power saving mode reduces the amount of power consumed during standby.
In this mode, the clock is not displayed.
Press DISPLAY repeatedly while the system is off until the demonstration display or the clock display disappears.
To cancel the Power Saving Mode
Press DISPLAY while the system is off. Each time you press the button, the display switches cyclically as follows:
Demonstration display tClock display* t No display (Power Saving Mode)
* The clock is displayed only if you set the clock.
Tip
The timer continues to operate in Power Saving Mode.
Using the CD display
Checking the remaining time
Press DISPLAY repeatedly during play.
Each time you press the button, the display changes cyclically as follows:
Elapsed playing time on the current track t Remaining time on the current track t Remaining time on the current CD tClock display (for eight seconds) tEffect status
Checking the total playing time
Press DISPLAY repeatedly in stop mode.
Each time you press the button, the display changes cyclically as follows:
During normal play mode:
Total number of tracks and total playing time
tClock display (for eight seconds) tEffect status
During Program Play mode when there is a program:
The last track number of the program and the total playing time tTotal number of programed tracks (for five seconds) tClock display (for eight seconds) tEffect status