Press – or + (or TUNING – or + on the unit) repeatedly to select the desired preset station.
Press TUNER BAND repeatedly to select “FM” or “AM”.

To change the AM tuning interval (except for European, Russian and Saudi Arabian models and Australian model MHC-RG444S)

The AM tuning interval is factory-preset to

9kHz (or 10 kHz for some areas). To change the AM tuning interval, tune in any AM station first,

then turn off the system. While holding TUNING MODE on the unit, press ?/1 on the

unit. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure.

Note

You cannot change the AM tuning interval in Power Saving Mode (page 27).

Tips

•The preset stations are retained for about a day even if you disconnect the power cord or if a power failure occurs.

•To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna.

Listening to the radio

You can listen to a radio station either by selecting a preset station, or by manually tuning in the station.

Listening to a preset station

— Preset Tuning

Preset radio stations in the tuner’s memory first (see “Presetting radio stations” on page 15).

1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner.

2

3 Press TUNING MODE repeatedly until “PRESET” appears in the display.

4

Preset number

 

Frequency

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

16GB