Listening to audio using wireless system1 Start playing the connected component.2 Press WIRELESS on the unit to switch the function to WIRELESS.When the sound is distorted

1Move CHANNEL 1–3 on the transmitter to select a radio frequency.

CHANNEL 1: 913.6 MHz

CHANNEL 2: 914.0 MHz

CHANNEL 3: 914.4 MHz

2Press WIRELESS on the unit. “AUTO SCAN” appears.

When FM broadcast or noise or no audio is heard, press WIRELESS on the unit several times. If you do not hear clear audio, select another channel using CHANNEL 1–3 on the transmitter, then press WIRELESS on the unit again.

To finish using WIRELESS function

Press any function button to select different function and quit WIRELESS.

Notes

•You may not hear the beginning of the sound from the main unit until the transmitter starts sending the RF signals after detecting an audio signal.

•If the transmitter is connected to the headphones jack of the source component, set the volume of that component as high as possible without distorting the audio signal.

•If you hold the antenna of the transmitter with your hand, noise may occur. However this is not a malfunction.

•When the transmitter is not to be used for a long period of time, disconnect the AC power adaptor from the wall outlet holding the plug. Do not pull on the cord.

32GB