Positioning the speakers

Place the front speakers at an angle of 45 degrees from your listening position.

 

Unit

Front

Front

speaker

speaker

(L)

(R)

 

45°

Surround speaker

Surround speaker

(L)

(R)

Setting the clock

Use buttons on the remote for the operation.

1 Press ?/1 to turn on the system.2 Press CLOCK/TIMER SET.

“CLOCK” appears in the display. Then, the hour indication flashes in the display.

3 Press .or >+ repeatedly to set the hour.4 Press ENTER.

The minute indication flashes in the display.

5 Press .or >+ repeatedly to set the minute.6 Press ENTER.

The clock starts functioning.

To adjust the clock

1Press CLOCK/TIMER SET.

“SET” appears in the display, then “PLAY SET?” flashes in the display.

2Press .or >+ repeatedly to select “CLOCK SET?”, then press ENTER. The hour indication flashes in the display.

3Do the same procedures as step 3 to 6 above.

Notes

The clock settings are canceled when you disconnect the power cord or if a power failure occurs.

You cannot set the clock in Power Saving Mode (page 24).

8US