Programing CD tracks (continued)

Tips

•The program you made remains after Program Play finishes. To play the same program again, press CD, then press H(or Non the remote).

•“--.--” appears when the total CD program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over.

Using the CD display

You can check the remaining time of the current track or the entire CD.

Press DISPLAY repeatedly.

During normal play

Playing time of the current track tRemaining time of the current track tRemaining time of current CD tClock display (for eight seconds) tEffect status

In stop mode

During Program Play mode when there is a program:

The last track number of the program and the total playing time tTotal number of programed tracks (for eight seconds) tClock display (for eight seconds) tEffect status

Tuner

Presetting radio stations

You can preset up to 20 stations for FM and 10 stations for AM.

1 Press TUNER/BAND repeatedly to select “FM” or “AM”.

2 Press and hold mor M(or TUNING – or + on the remote) until the frequency indication starts to change, then release it.

Scanning stops automatically when the system tunes in a station.

3 Press TUNER MEMORY on the remote.

A preset number appears in the display. The stations are stored from preset number 1.

Preset number

4 Press ENTER on the remote.

“COMPLETE” appears. The station is stored.

5 Repeat steps 1 to 4 to store other stations.

To tune in a station with a weak signal

Press mor M(or TUNING – or + on the remote) repeatedly in step 2 to tune in the station manually.

12