Setting the time
1 Press ?/1 to turn on the system.2 Press CLOCK/TIMER SET on the remote.Proceed to step 5 when “ CLOCK” appears in the display.
3 Press . or > repeatedly to select “SET CLOCK”.4 Press ENTER on the remote.5 Press . or > repeatedly to set the hour.6 Press ENTER on the remote.The minute indication flashes.
7 Press . or > repeatedly to set the minute.8 Press ENTER on the remote.Tip
If you made a mistake or want to change the time, start over from step 2.
Note
The clock settings are canceled when you disconnect the power cord or if a power failure occurs.
Saving the power in
standby mode
Press DISPLAY repeatedly when the system is off. Each time you press the button, the system switches cyclically as follows:
Demonstration t Clock display t Power Saving Mode
Tips
•?/1indicator lights up even in the Power Saving Mode.
•The timer works even in the Power Saving Mode.
Note
You cannot set the time in the Power Saving Mode.
To cancel the Power Saving ModePress DISPLAY once to show the demonstration or twice to show the clock display.
Started Getting
9