To set another station to an existing preset number
Start over from step 1. After step 3, press . or >(or PRESET
You can preset a new station in the selected preset number.
To erase a preset station
1Press and hold TUNER MEMORY on the remote until a preset number appears in the display.
2Press .or >(or PRESET – or + on the remote) repeatedly to select the preset number you want to erase.
Select “ ALL ERASE” when you want to erase all the preset stations.
3Press ENTER on the remote. “COMPLETE” appears.
When you erase a preset number, the preset number decreases by one and all preset numbers following the erased one are renumbered.
To change the AM tuning interval (except for the European and Middle Eastern models)
The AM tuning interval is
Tip
The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs.
Listening to the radio
— Preset Tuning
Preset radio stations in the tuner’s memory first (see “ Presetting radio stations” on page 12).
1 Press TUNER/BAND repeatedly to select “FM” or “AM”.
2 Press .or >(or PRESET – or + on the remote) repeatedly to tune in the desired preset station.
Preset number | Frequency* | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*When only one station is preset, “ ONE PRESET” appears in the display.
To listen to non-preset radio stations
Use manual or automatic tuning in step 2. For manual tuning, press mor M(or TUNING
Tips
•When an FM stereo program has static noise, press STEREO/MONO repeatedly until “ MONO” appears. There will be no stereo effect, but the reception will improve.
•To improve broadcast reception, adjust the supplied antennas.
CD/Tuner
13