DJ Effects
Looping part of a CD
— Loop
With the loop function, you can repeat part of a CD during playback. This lets you create original recordings.
(Power)
LOOP | Jog dial |
Flashing part of a CD
— Flash
With the flash function, you can “flash” the CD sound during playback. This lets you create original recordings.
(Power)
FLASH Jog dial
/Press and hold LOOP during playback at the point you want to start the loop function, and release to resume normal play.
To adjust the loop length
Turn the jog dial while holding LOOP (or press SELECT >or .while holding LOOP on the remote) to select different loop lengths (LOOP 1~20).
30
/Press and hold FLASH during playback at the point you want to start the flash function, and release to resume normal play.
To adjust the flash length
Turn the jog dial while holding FLASH (or press SELECT >or .while holding FLASH on the remote) to select different flash lengths (FLASH 1~20).
To use LOOP and FLASH together
Press and hold both LOOP and FLASH at the same time.
Notes
•The loop and flash length cannot be adjusted during this operation. Adjust the loop and flash lengths independently beforehand if necessary.
•To record the flash effect, use the analog (MD OUT) connections or this unit’s tape deck.