— Program Edit
You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape.
(Power) | 4 p 1 |
|
|
| 6 |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
11,EDIT 5 | 10 1 | ||||||
2 3, DOLBY NR | 12 |
|
|
| |||
· 
CHECK
ª·
ª·
=+ p
0 | ) | P | 8 |
· | P |
| p |
| |||
|
| ||
1 Place a CD and insert a recordable tape into deck B.
2 Press FUNCTION repeatedly until “CD” appears in the display.
3 Press PLAY MODE repeatedly until “PROGRAM” appears in the display.
4 Press one of the DISC 1~3 buttons to select a CD.
5 Turn the jog dial until the desired track appears in the display.
Total playing time
Disc number (including selected track)
Track number
6 Press ENTER/NEXT.
The track is programmed. The program step number appears, followed by the total playing time.
7 To program additional tracks to be recorded on side A, repeat steps 4 to 6.
Skip step 4 to select tracks from the same disc.
8 Press Pon the remote to insert a pause at the end of side A.
“P” appears in the display and the total playing time resets to “0.00” in the display.
28