Step 1: Hooking up the system (continued)
6Connect the power cord to a wall outlet.
The demonstration appears in the
display. When you press 
, the system turns on and the demonstration automatically ends.
If the supplied adapter on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adapter).
To connect optional components
See page 45.
To deactivate the demonstration
When you set the time (Step 3: Setting the time), the demonstration is deactivated.
To activate/deactivate the demonstration again, press DISPLAY
Tip
You can reinforce the bass sound by connecting an optional super woofer to the super woofer connector.
To attach the speaker pads
Attach the supplied speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping.
Front speaker
Center surround speaker
Inserting two size AA (R6) batteries into the remote
| ] | |
} | } | |
] | ||
|
Tip
With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage.
When carrying this system
Do the following to protect the CD mechanism.
1Press FUNCTION repeatedly until “CD” appears in the display.
2 Hold down LOOP and press 
so that “LOCK” appears in the display.
6