Connecting a DVD player (continued)

(Power)

DVD 5.1CH

When your DVD player has stereo analog outputs

Be sure to match the color of the plugs and the connectors. Connect the LINE OUT (audio) output jack of your DVD player to the FRONT jacks of DVD INPUT with the audio connecting cable. To listen to the sound from the connected DVD player, press DVD 5.1CH until “DVD” appears in the display.

Notes

Each time you press DVD 5.1CH, the function changes as follows.

DVD 5.1CH ˜

DVD (2 channel)

You cannot enjoy the 5.1 channel surround sound if you connect a DVD player which does not have the 5.1 channel analog outputs.

If there is no sound when you connect a DVD player which has 5.1 channel analog outputs, connect the LINE OUT (audio) output jacks of your DVD player to the MD IN jacks, then change the function to MD by pressing FUNCTION.

Connecting external antennas

Connect the external antenna to improve the reception. Refer to the instructions of each component.

FM antenna

Connect the optional FM external antenna. You can also use the TV antenna instead.

Jack type A

75-ohm coaxial cable (not supplied)

FM75

AM

Jack type B

IEC standard socket connector

(not supplied)

FM75

COAXIAL

AM

48