Recording a CD by specifying track order

— Program Edit

You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape.

This function cannot be used during menu playback of VIDEO CDs with PBC functions (Ver. 2.0).

3, 4

(Power) 2 DOLBY NR 11,EDIT 1

p5 6 1012

CHECK

EDIT

8

1 Place a CD and insert a blank tape into deck B.

2 Press FUNCTION repeatedly until “CD” appears in the display.

3 Press PLAY MODE repeatedly until “PROGRAM” appears in the display.

4 Press one of the DISC 1~3 buttons to select a CD.

5 Turn the jog dial until the desired track appears in the display.

Disc number

Total playing time

(including selected track)

SYNC

 

 

VOLUME

ALL 1 DISCS PROGRAM

STEP ß

SHUFFLE REPEAT 1

 

Track number

6 Press ENTER/NEXT.

The track is programmed. The program step number appears, followed by the total playing time.

7 To program additional tracks to be recorded on side A, repeat steps 4 to 6.

Skip step 4 to select tracks from the same disc.

8 Press Pon the remote to insert a pause at the end of side A.

“P” appears in the display and the total playing time resets to “0.00” in the display.

continued

41