Step 3: Presetting radio stations

You can preset the following number of stations:

–2 band model: 20 for FM, 10 for AM.

–3 band model: 20 for FM, 10 for MW, and 10 for SW.

 

 

(Power)

4 5 1 3

 

2

1 Press TUNER/BAND repeatedly until the band you want appears in the display.

The bands you can receive vary depending on the model you purchased. Be sure to check which bands you can receive.

Every time you press this button, the band changes as follows:

2 band model: FM ˜AM

3 band model:

FM nMW nSW n

2 Press and hold + or – until the frequency indication starts to change, then release.

Scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo program) appear.

MONO TUNED

STEREO

 

 

VOLUME

ALL DISCS

kHz

 

 

MHz

ß

3 Press TUNER MEMORY.

A preset number appears in the display.

Preset number

VOLUME

ALL DISCS

ß￿

4 Turn the jog dial to select the preset number you want.

5 Press ENTER/NEXT.

The station is stored.

6 Repeat steps 1 to 5 to store other stations.

To tune in a station with a weak signal

Press + or – repeatedly in step 2 to tune in the station manually.

To change the preset number

Start over from step 1.

continued

9