Recording a CD by specifying track order (continued)

Selecting tape length

automatically —Tape Select Edit

You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing over 20 tracks.

1 Insert a CD.

2 Press FUNCTION repeatedly until “CD” appears in the display.

3 Press MODE SELECT repeatedly to select “Set Up Mode”, then press PUSH ENTER.

4 Move the multi stick toward b or B repeatedly to select “CD Set Up ?”, then press PUSH ENTER.

5 Move the multi stick toward b or B repeatedly to select “CD Edit Start ?”, then press PUSH ENTER.

The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively.

DJ Effects

Looping part of a CD

— Loop

With the Loop function, you can repeat part of a CD during playback. This lets you create original recordings.

LOOP

V

B

b

v/V

v

,Press and hold LOOP on the remote during playback at the point you want to start the Loop function, and release to resume normal play.

To adjust the loop length

Press V or v repeatedly while holding LOOP on the remote to select different loop lengths (LOOP 1~20).

30