43
Using functions for viewing
Using functions for viewing
Viewing menu
The function in viewing mode using MENU button are described below. For details on how to
operate the menu, see page 29.
When the mode has been set to shooting mode, switch it to playback with (Play) button.
1Select the images you want to start slide show with the multi-s elector tilt to v/V/b/B, then press
the multi-selector.
2Press MENU to display the menu.
3Select (Slideshow) with the multi-selector tilt to v/V, then press the multi-selector.
4Select [Start] with v/V, then press the multi-selector to start playback.

To stop the slideshow

Press the multi-selector.
• You cannot resume the slideshow from this status.

To change the setup

Before starting slideshow, you can change the settings using the multi-selector.
The default settings are marked wit h .

(Delete): Allows you to select and delete unwanted images

This Image Deletes the currently displayed image in single-image mode.
Multiple Images Allows you to select and delete multiple images.
1Select an image then press the multi-selector.
Repeat the above steps until there are no more images to be deleted.
Select an image with a mark again to release the mark.
2MENU t [OK] t the multi-selector
Delete All Images Deletes all images at once except protected images.
Press [OK].

(Slideshow): Playing back a series of images