Laser | Semiconductor laser |
| (CD: λ=780 nm) |
| Emission duration: |
| continuous |
Frequency response | CD: 2 Hz – 20 kHz |
Wavelength | 780 – 790 nm |
Tape deck section |
|
Recording system | |
Frequency response | 50 – 13,000 Hz (±3 dB), |
| using Sony TYPE I |
| cassettes |
Wow and flutter | ±0.15% W. Peak (IEC) |
| 0.1% W. RMS (NAB) |
| ±0.2% W. Peak (DIN) |
FM stereo, FM/AM superheterodyne tuner
FM tuner section |
|
Tuning range |
|
North American model: | 87.5 – 108.0 MHz |
| (100 kHz step) |
Other models: | 87.5 – 108.0 MHz (50 kHz |
| step) |
Antenna | FM wire antenna |
Antenna terminals | 75 ohms unbalanced |
Intermediate frequency | 10.7 MHz |
AM tuner section |
|
Tuning range |
|
530 – 1,710 kHz | |
| (with the tuning interval |
| set at 10 kHz) |
European model: | 531 – 1,602 kHz |
| (with the tuning interval |
| set at 9 kHz) |
Other models: | 530 – 1,710 kHz |
| (with the tuning interval |
| set at 10 kHz) |
| 531 – 1,602 kHz |
| (with the tuning interval |
| set at 9 kHz) |
Antenna | AM loop antenna, external |
| antenna terminal |
Intermediate frequency | 450 kHz |
Speaker | |
Speaker system | |
Speaker units |
|
Woofer: | 13 cm dia., cone type |
Tweeter: | 2.5 cm dia., Balanced- |
| |
Nominal impedance | 4 ohms |
Power requirements |
|
|
North American model: | 120 | V AC, 60 Hz |
European model: | 230 | V AC, 50/60 Hz |
Australian model: | 230 | – 240 V AC, 50/60 Hz |
Other models: | 220 | – 240 V AC, 50/60 Hz |
Power consumption |
|
|
European model: | 50 W | |
| 0.3 W (in Power Saving | |
| mode) | |
Other models: | 50 W |
Dimensions (w/h/d) incl. projecting parts and controls Amplifier/Tuner/Tape/CD section:
| Approx. 174 × 240.5 × 291 |
| mm |
Speakers: | Approx. 160 × 240 × 240 |
| mm |
Mass |
|
Amplifier/Tuner/Tape/CD section: | |
| Approx. 4.3 kg |
Speakers: | Approx. 3.1 kg net per |
| speaker |
Supplied accessories | Remote (1) |
| R6 (size AA) batteries (2) |
AM loop antenna (1)
FM lead antenna (1)
Speaker pads (8)
Design and specifications are subject to change without notice.