BConnecting to a power source

You can check the remaining power of the battery in the display.

ttttt

Lobatt*

* Beep sounds.

When the battery is depleted, charge the rechargeable battery or replace the dry battery with new one.

Using the rechargeable battery (this page)

Using the dry battery (page 35)

Notes

The indicator sections of

roughly show the

 

remaining battery power. One section does not

 

always indicate one-fourth of the battery power.

Depending on operating conditions, the indicator

 

sections of

may increase or decrease.

When using the rechargeable battery and dry battery together to extend power, use a fully charged rechargeable battery and new dry battery.

For the battery life and charging time of the rechargeable battery, see “Specifications.”

Using the rechargeable battery

Charge the rechargeable battery before using it for the first time.

To keep the original battery capacity for a long time, charge the battery only when it is completely depleted. You can use only the following rechargeable battery for your CD player.

NH-14WM (supplied)

1 Squeeze OPEN from both sides to

open the lid of your CD player, then open the battery compartment lid inside the player.

2

1

2 Insert the rechargeable battery by matching the 3 to the diagram in the battery compartment and close the lid until it clicks into place.

Insert the # end first.

(Continued)

to Connecting

power a source

33