Symptom | Cause and/or corrective action |
During playback of an ATRAC | c The CD player is designed to stop the rotation of an ATRAC CD or |
CD or MP3 CD, the CD does | MP3 CD during playback to reduce the power consumption. The |
not rotate but you can hear | player is not malfunctioning. |
the sound normally. |
|
“NO FILE” appears on the | c There are no ATRAC3plus/ATRAC3/MP3 files in the CD. |
display after you press the | c A |
jog lever (CD player: after | c The CD is dirty. |
you push the |
|
key toward u) or when the |
|
lid of the CD player is closed. |
|
cThe CD player is reading the information on the CD. The player is not malfunctioning.
The LCD display becomes | c You are using your CD player at high temperatures (above 40°C/ |
hard to see or slows down. | 104°F) or at low temperatures (below 0°C/32°F). At room |
| temperature, the display will return to its normal operating |
| condition. |
“” is flashing quickly on the display of the remote control, and you cannot locate the beginning of the track or a specific point in the track.
cThe CD player has entered the preparation stage of Bookmark track play. Change the PLAY MODE setting to “ALL.”
You cannot operate the CD | c | The buttons on the CD player are kept pressed by mistake. |
player properly using the |
|
|
remote control. |
|
|
Play stopped abruptly. | c | OFF TIMER has been set. Change the setting to “OFF.” |
information Additional
41