Notes
•Do not connect to the PHONES IN jack and LINE IN jack at the same time. If you connect two audio/visual components to both jacks at the same time, both of the audio signals may result in mixed output.
•Use only the supplied AC power adaptor. Do not use any AC power adaptor.
Unified polarity plug
•When you connect the connecting cord directly to an earphone jack (monaural mini jack), the audio signal may not be output through the right channel. In such a case, use the separately sold
NOperating the system
Listening to a program
Before listening
To prevent your ears from being damaged, first lower the volume.
1 Turn on the audio/video component connected to the transmitter.When the audio signal is input, the transmitter turns on automatically and the infrared emitters glow but they do not glow while the transmitter is charging the battery. If the transmitter is connected to the headphone jack, set the volume control of the audio source component as high as possible but not so high that the audio signal becomes distorted.
2 Turn on the headphones.The power indicator on the upper part of the right housing glows red.
3 Put on the headphones.Be sure to put the right housing (R) on your right ear and the left housing (L) on your left ear.
10GB |
| Operating the system |
|
|
|