– When using Windows 98SE/Windows Me –

1 Double-click the “System” icon on the “Control Panel.”

The “System Properties” screen appears.

2 Check if the device driver has already been installed.

1Click the [Device Manager] tab on the “System Properties” screen.

2 Double-click [Universal Serial Bus Controller].

3 Check whether [? MSAC-USM1] preceded by the “?” symbol is shown.

3 Delete the driver if installed.

If you use the procedure described in Step 2 and find that [? MSAC- USM1] is shown under “Universal Serial Bus Controller,” a separate device driver has already been installed.

Use the following procedure to delete this driver.

Do not delete other devices than [? MSAC-USM1].

1Click on [? MSAC-USM1].

2Click on [Remove]. The “Confirm Device Removal” screen appears.

3 Click the [OK] button. The device is removed.

4 Restart your computer after disconnecting this unit from the computer.

Install the device driver again by performing the procedure from Step 1 described on page 13.

PNote

If you delete other devices than [? MSAC-USM1], your computer may no longer operate normally.

21-US