3If there is a device indicated with a question mark, delete it.

1Click “ Sony DSC” or “ Sony Handycam”.

2Click “Remove.” The “Confirm Device Removal” screen appears.

3Click the “OK” button.

4Turn off your camera and disconnect the dedicated USB cable from the camera and computer.

5Install the USB driver provided on the supplied CD-ROM.

See “Step 1 Installing the USB driver to the computer (page 29).”

Viewing images on Macintosh

Recommended Computer environment

OS: Mac OS 8.5.1/8.6/9.0/9.1/9.2, Mac OS X(v10.0/v10.1) The above OS must be installed at the factory.

However, note that the upgrade to Mac OS 9.0/9.1 should be used for the following models.

—iMac with the Mac OS 8.6 factory pre-installed and a slot loading type CD-ROM drive

—iBook or Power Mac G4 with the Mac OS 8.6 factory pre-installed Mac OS X(v10.0/v10.1) users can use a USB connection only when a “Memory Stick” is used.

Display: Resolution of 800⋅ 600 dots or higher, 32 000-color mode or higher The USB connector must be provided as standard.

QuickTime 3.0 or newer must be installed to play back moving pictures.

Notes

•If you connect two or more devices that use USB to a single computer or use a hub, operation is not guaranteed.

•Some USB devices may not operate if they are connected to the computer at the same time as your camera.

•Operations are not guaranteed for all the recommended computer environments mentioned above.

General procedure for viewing images

Step 1 Installing the USB driver to the computer (page 35)

Perform this step only when you view the images on your computer for the first time.

Step 2 Connecting your camera to your computer using the USB cable (page 36)Step 3 Viewing images on Macintosh (page 36)

34