
Adjusting the brightness of the LCD screen
Use the BRIGHT +/– button.
Flash/Self-timer
FLASH CHARGE lamp
Flash
Press FLASH.
When the blinking FLASH CHARGE lamp lights up, you can shoot images using the flash.
To cancel flash mode, press it again.
Select with the control button, then press it. About 10 seconds after you press the shutter button, the subject is recorded.
•The subject must be 1 5/8 feet to 10 feet (50 cm to 3 m) away from the flash.
•If flash is used in FRAME mode, the image is recorded in FIELD mode. The FRAME indicator flashes on the LCD screen (p. 33).