Notes
•When recording bright subjects, the color of the LCD screen may change after the AE is locked, however, this will not affect the recorded image.
•While the image is being recorded on a floppy disk, the ACCESS lamp lights. When this lamp is lit, do not shake or strike the camera. Also, do not turn the power off, or not remove the battery pack/floppy disk. Otherwise, an image data breakdown may occur and the floppy disk may become unusable.
•When using a “Memory Stick,” writing and reading images take about twice times than using a floppy disk.
Checking the last recorded image (Review)
Clear the menu bar (page 29), and press b on the control button. To return to the normal recording mode, press lightly on the shutter button or select [RETURN] with b/B on the control button and then press the center z. To delete the image, select [DELETE] on the review screen with b/B on the control button, then press the center z. And select [OK] with v on the control button, then press the center z.
Adjusting the brightness of the LCD screen
LCD BACKLIGHT switch
Adjust the brightness with the [LCD BRIGHT] item in the menu settings (page 34). This adjustment does not affect the brightness of the images recorded on the floppy disk.
To turn off the LCD backlight
Set the LCD BACKLIGHT switch to OFF to save the battery.
16