Charging the battery pack

When the camera is turned on, you cannot charge the battery pack. Be sure to turn off the power of the camera.

 

2

to DC IN jack

AC-L10A/L10B/L10C AC

power adaptor

1

 

Battery pack

3

Power cord (mains lead)

 

started Getting

1Insert the battery pack into your camera.

2Open the DC IN cover and connect the DC connecting plug to the DC IN jack of your camera with the v mark facing up.

3Connect the power cord (mains lead) to the AC power adaptor and then to a wall outlet (mains).

The ON/CHG lamp (orange) below the LCD screen lights up when charging begins. When the ON/CHG lamp goes off, normal charge is completed. For full charge, which allows you to use the battery longer than usual, leave the battery pack inserted for about one hour after normal charge is completed.

Battery remaining indicator

The LCD screen on the camera shows the remaining time for which you can still record or play back images.

This indication may not be entirely accurate depending on the conditions of use and the operating environment.

Auto power-off function

If you do not operate the camera for about three minutes during recording, the camera turns off automatically to prevent wearing down the battery pack. To use the camera again, slide the POWER switch to the right to turn on the camera again.

9