To register tracks into a group
In step 6, press . or > repeatedly (or turn AMS) to select the number of the first track you want to register, then press YES (or AMS).
When registering only one track, press YES again. When registering two or more tracks, press . or > (or turn AMS) repeatedly to select the number of the last track you want to register, then press YES (or AMS).
Notes
•You cannot register the same track to more than one group.
•If you do not enter a group title in step 5, “Group ** (group number)” appears as the group title.
Tip
You can also register tracks that were recorded on a deck that does not support the Group Function.
— Release Function
1 |
|
4 | 5,6 |
| – MD |
2 | Editing |
| |
5 | 3 |
|
These functions allow you to release group registrations simply by specifying the group for which you want to release the registrations. In addition, you can also release the registrations of all groups on an MD at once.
For details on the group management information, see “Registering tracks in groups” on page 31.
Releasing a single group
— Group Release Function
You can release a specified group and erase that group. (However, note that the tracks are not erased.)
1
2 Press GROUP ON/OFF repeatedly until “GROUP ON” appears.
3 Press ALBUM/GROUP – or + (or GROUP SKIP) repeatedly until the desired group appears.
4 Press MENU/NO.
continued