13. Troubleshooting & Maintenance
Keypad | Protective | Descriptions | ||
display | functions | |||
| ||||
| Inverter |
| This fault message is displayed when an error occurs in the control circuitry of the | |
| hardware fault | inverter. | ||
| Communication | This fault message is displayed when the inverter cannot communicate with the keypad. | ||
| Error |
|
| |
| Cooling | fan | This fault message is displayed when a fault condition occurs in the inverter cooling fan. | |
| fault |
|
| |
|
|
| Used for the emergency stop of the inverter. The inverter instantly turns off the output | |
|
|
| when the EST terminal is turned on. | |
| Instant cut off | ☞ Caution : | ||
|
|
| The inverter starts to regular operation when turning off the Est terminal while FX or RX | |
|
|
| terminal is ON. | |
| External fault A | When | ||
| contact input | (Normal Open Contact)}, the inverter turns off the output. | ||
| External fault B | When | ||
| contact input | (Normal Close Contact)}, the inverter turns off the output.. | ||
| Operating |
| When inverter operation is set via Analog input | |
| method | when | (RS485) and no signal is applied, operation is done according to the method set in I62 | |
| the frequency | (Operating method when the frequency reference is lost). | ||
| command | is |
| |
| lost |
|
|