LG Electronics SV-iC5 Series manual Group

7. Function list

								I/O group
LED		Parameter		Min/Max	Description		Factory	Adjustable		Page
display		name		range			defaults	during run
I 0	[Jump code]		0/63		This parameter sets the code number to jump	1		O	5-5
I 1		[Filter time	0/9999		This is used to adjust the analog voltage input	10		O	9-2
		constant for			signal via keypad potentiometer.
		V0 input]
I 2	[V0 input Min		0/10		Set the minimum voltage of the V0 input.	0		O
		voltage]		[V]
I 3	[Frequency		0/400		Set the inverter output minimum frequency at	0.0		O
		corresponding		[Hz]	minimum voltage of the V0 input.
		to I 2 ]
I 4	[V0 input Max		0/10		Set the maximum voltage of the V0 input.	10		O
		voltage]		[V]
I 5	[Frequency		0/400		Set the inverter output maximum frequency at	60.0		O
		corresponding		[Hz]	maximum voltage of the V0 input.
		to I 4]
I 6		[Filter time	0/9999		Set the input section’s internal filter constant for	10		O	9-3
		constant for			V1 input.
		V1 input]
I 7	[V1 input Min		0/10		Set the minimum voltage of the V1 input.	0		O
		voltage]		[V]
I 8	[Frequency		0/400		Set the inverter output minimum frequency at	0.0		O
		corresponding		[Hz]	minimum voltage of the V1 input.
		to I 7]
I 9	[V1 input max		0/10		Set the maximum voltage of the V1 input.	10		O
		voltage]		[V]
I10	[Frequency		0/400		Set the inverter output maximum frequency at	60.0		O
		corresponding		[Hz]	maximum voltage of the V1 input.
		to I 9]
I11		[Filter time	0/9999		Set the input section’s internal filter constant for	10		O	9-4
		constant for I			I input.
		input]
I12		[I input	0/20		Set the Minimum Current of I input.	4		O
		minimum		[mA]
		current]

7-16 SV-iC5