LG Electronics SV-iC5 Series manual Basic functions, Freq. setting Freq P5 Run command

9. Basic functions

Frequency setting via Potentiometer on the keypad + 0-10V input

Group		LED Display		Parameter Name		Set		Min/Max		Factory	Unit
						Value		Range		Defaults
Drive	0.0		[Frequency Command]		-		-		-		Hz
group
		Frq		[Frequency Mode]		7	0/8		0

Set Frq – [Frequency Mode] to 7 {Potentiometer on the keypad + 0-10V input}.

Relative code: I 1 - I 5, I6 - I10

Refer to P 9-4Frequency setting via potentiometer on the Keypad + 0-20mA input for the setting.

Analog Hold

Group		LED Display		Parameter Name		Set		Min/Max		Factory	Unit
						Value		Range		Defaults
Drive		Frq		[Frequency Mode]		2/7	0/8		0
group
I/O group		I20		[Multi-function input terminal	-		0/24		0
				P1 define]
	~		~
		I24		[Multi-function input Terminal		23			4
				P5 Define]

This setting becomes activated when Frq – [Frequency Mode] is set to 2-7.

Set one of the Multi-function input terminals to 23 to activate Analog Hold operation.

When I24 –[Multi-function input terminal P5 define] is set to 23,

Freq. setting

Freq.

P5

Run command

9-5 SV-iC5