LG Electronics SV-iC5 Series manual Programming keypad, Changing parameter value in Drive group

5. Programming keypad

5.5Parameter setting method

Changing parameter value in Drive group

When changing ACC time from 5.0 sec to 16.0

Drive group

1

2

3

4

5

6

7

8

-. In the first code “0.0”, press the Up (S) key once to go to the second code.

-. ACC [Accel time] is displayed.

-. Press the Prog/Ent key (z) once.

-. Preset value is 5.0, and the cursor is in the digit 0.

-. Press the Left (W) key once to move the cursor to the left.

-. The digit 5 in 5.0 is active. Then press the Up (S) key once.

-. The value is increased to 6.0

-. Press the Left (W) key to move the cursor to the left.

-. 0.60 is displayed. The first 0 in 0.60 is active. -. Press the Up (S) key once.

-. 16.0 is set.

-. Press the Prog/Ent (z) key once. -. 16.0 is blinking.

-. Press the Prog/Ent (z) key once again to return to the parameter name.

-. ACC is displayed. Accel time is changed from 5.0 to 16.0 sec.

♣In step 7, pressing the Left (W) or Right (X) key while 16.0 is blinking will disable the setting.

Note) Pressing the Left (W)/ Right (X) /Up (S) /Down (T) key while cursor is blinking will cancel the parameter value

change.

5-7 SV-iC5