LG Electronics SV-iC5 Series manual Monitoring

11. Monitoring

11: Command Loss

Become active when frequency command is lost.

12: During run

Become active when run command is given and the inverter generates output voltage.

Freq.

MO Run

command

13: During stop

Activated during stop.

Freq.

MO Run

command

14: During constant run

Activated during nominal operation.

Freq.

MO

Run command

15: During speed searching

Refer to Page 10-12 Speed search operation.

16: Wait time for run signal input

This function becomes active during normal operation and that the inverter waits for active run command from external sequence.

17: Fault relay output

The parameter set in I56 is activated.

For example, if setting I55, I56 to 17 and 2, respectively, Multi-function output relay will become active when trip other than “Low voltage trip” occurred.

11-10 SV-iC5