LG Electronics SV-iC5 Series manual Jump code

7. Function list

Function group 2

LED		Parameter		Min/Max	Description		Factory		Adjustable		Page
display		name		range			defaults		during run
H 0		[Jump code]	1/95		This parameter sets the code number to jump.	1			O	5-5
H 1	[Fault history 1]		-		This parameter stores information on the		nOn	-		11-4
					types of faults, the frequency, the current and
H 2	[Fault history 2]		-				nOn	-
					the Accel/Decel condition at the time of fault.
H 3	[Fault history 3]		-				nOn	-
					The last fault is automatically stored in the
H 4	[Fault history 4]		-				nOn	-
					H 1- [Fault history 1].
H 5	[Fault history 5]		-				nOn	-
H 6		[Reset fault	0/1		This parameter clears the fault history	0			O
		history]			saved in H 1-5.
H 7		[Dwell		F23/400	When run frequency is issued, motor starts	5.0			X	10-5
		frequency]		[Hz]	to accelerate after dwell frequency is applied
					to the motor during H8- [Dwell time].
					[Dwell frequency] can be set within the
					range of F21- [Max frequency] and F23- [Start
					frequency].
H 8		[Dwell time]	0/10 [sec]		This parameter sets the time for dwell	0.0			X
					operation.
H10		[Skip	0/1		This parameter sets the frequency range to	0			X	9-20
		frequency			skip to prevent undesirable resonance and
		select]			vibration on the structure of the machine.
H11		[Skip	0/400		Run frequency cannot be set within the	10.0			X
1)		frequency low		[Hz]	range of H11 thru H16.
		limit 1]			The frequency values of the low numbered
H12		[Skip			parameters cannot be set above those of the	15.0			X
		frequency high			high numbered ones.
		limit 1]
H13		[Skip				20.0			X
		frequency low
		limit 2]
H14		[Skip				25.0			X
		frequency high
		limit 2]
H15		[Skip				30.0			X
		frequency low
		limit 3]

7-8 SV-iC5