part
3. Lift it up to remove.
2. Hold both
1. Basic information & precautions
1.3Removal and reinstallation
1.3.1Removal of the front cover
To change parameter setting: Press the pattern with a finger slightly as 1) and push it downward as 2). Then
1) | 2) |
1. Press here gently
Side slot
2. Push it down
Removal for wiring: The method is the same as shown in 1. Hold both sides of the cover and lift upward to completely remove from the main body.
1) | 2) | sides of this |
|
Parallel!
1. Push down
the cover until
cover top
matches the
side slot.