Important User Information
pinching.
Otherwise, you may get an electric shock.
CAUTION
Install the inverter on a
Otherwise, fire could occur.
Disconnect the input power if the inverter gets damaged.
Otherwise, it could result in a secondary accident and fire.
After the input power is applied or removed, the inverter will remain hot for a couple of minutes.
Otherwise, you may get bodily injuries such as
Do not apply power to a damaged inverter or to an inverter with parts missing even if the installation is complete.
Otherwise, electric shock could occur.
Do not allow lint, paper, wood chips, dust, metallic chips or other foreign matter into the drive.
Otherwise, fire or accident could occur.
OPERATING PRECAUTIONS
(1) Handling and installation
Handle according to the weight of the product.
Do not stack the inverter boxes higher than the number recommended. Install according to instructions specified in this manual.
Do not open the cover during delivery. Do not place heavy items on the inverter.
Check the inverter mounting orientation is correct. Do not drop the inverter, or subject it to impact.
Use the Type 3 grounding method for 200 V Class (Ground impedance: Below 100 ohm).
Take protective measures against ESD (Electrostatic Discharge) before touching the pcb for inspection or installation.
Use the inverter under the following environmental conditions:
| Surrounding | |
| temperature | |
| Relative | 90% RH or less |
| humidity |
|
Environment | Storage | - 20 ~ 65 ℃ |
| temperature |
|
| Location | Protected from corrosive gas, combustible gas, oil mist or dust |
| Altitude, | Max. 1,000m above sea level, Max. 5.9m/sec2 (0.6G) or less |
| Vibration |
|
iiSV-iC5