LG Electronics SV-iC5 Series manual Programming keypad, Code change in Drive group

5. Programming keypad

5.4How to change the codes in a group

Code change in Drive group

Drive group

1	-. In the 1st code in Drive group “0.0”, press the
	Up (S) key once.
	-. The 2nd code in Drive group “ACC” is
2	displayed.
	-. Press the Up (S) key once.
	-. The 3rd code “dEC” in Drive group is
3	displayed.
	-. Keep pressing the Up (S) key until the last
	code appears.
	-. The last code in Drive group “drC” is
4	displayed.
	-. Press the Up (S) key again.
5	-. Return to the first code of Drive group.

♣Use Down (T) key for the opposite order.

Code change in Function group 1

When moving from the “F 0” to the “F 15” directly

1	-. Press the Prog/Ent (z) key in “F 0”.
2	-. 1 (the code number of F1) is displayed. Use the
	Up (S) key to set to 5.
	-. “05” is displayed by pressing the Left (W) key
	once to move the cursor to the left. The numeral
3	having a cursor is displayed brighter. In this case, 0
	is active.
	-. Use the Up (S) key to set to 1.
4	-. 15 is set.
	-. Press the Prog/Ent (z) key once.
Function
group 1	-. Moving to F 15 has been complete.
5

♣Function group 2 and I/O group are settable with the same setting.

5-5 SV-iC5