Polycom 40/0 manual Configure IP Settings through Console, Configure System Time

System Initialization

Step 5: Configure System Time

You also can set the RealPresence Capture Server system time from the Fast Configuration Wizard

For configuration steps, refer to Set the System Time

Configure IP Settings through Console

By default, when a new RealPresence Capture Server is started, it obtains an IP address from the DHCP server automatically. Follow the steps below to check the IP address assigned by DHCP server. You can configure IP settings from either Capture Server system’s Console or Admin Portal.

To set the system IP address in the RealPresence Capture Server’s console:

1Open the console of your RealPresence Capture Server.

2The default console display is shown in the next illustration

3The IP address displayed on console is shown in the above illustration, the default IP address is https://192.168.1.254

4If needed, modify the RealPresence Capture Server IP address in the Admin UI. See To change the system’s initial IP settings from the Admin Portal:

5Type Alt+F2 keys to go to the login screen.

6Enter the user name and password (both are polycom by default).

7Set RealPresence Capture Server a static IP or DHCP for LAN interface using Network Settings command, refer to Network Settings for details.

Note: After you are finished with DHCP setting configuration, go to console and get the IP address information assigned by DHCP server.

8After you set the IP, the Capture Server system will ask if you want the changes, click Yes to reboot.

Polycom, Inc. 19