Polycom 40/0 manual Console Command Descriptions, Network Settings

Appendix A – Console Commands

If you have completed all the above configurations and launched Console successfully, press the Enter key. The login interface appears.

Console Command Descriptions

You can use the following commands.

Network Settings

Select Network Setting and type Enter to set network configurations (DHCP IP address and static IP address) for LAN 1 or LAN 2.

To configure Static IP Address for LAN 1 or LAN 2

1Choose a network interface, click OK or type Enter.

2Select Static Address Setup, click OK or type Enter.

3Configure network settings.

Parameter	Description
IP Address	IP address of the network port
Default Gateway	Gateway address of the network port
Subnet Mask	Subnet mask of the network port

4Click Save configuration if you are fine with the settings or Cancel to return.

5The system will show the prompt message Yes to save the configuration? Choose Yes to proceed or No to cancel.

6At the popup message, click Yes if you want the system to restart to apply your changes.

Polycom, Inc. 86