Polycom 40/0 Multi-bitrate Live Streaming, To configure live streams in recording template

Live Streaming

The RealPresence Capture Server system supports live streaming of video sources, such as live video conference or dual stream sent by endpoints or MCUs with a highest resolution of 1080p and a maximum bandwidth of 4M. Those live streaming videos are saved in the system.

Live streaming supports dual streaming rates; this allows you to choose the appropriate bandwidth to view video based on your network condition.

Multi-bitrate Live Streaming

If the recording template is configured, the Capture Server system could send a specific resolution live stream to low bandwidth sites and a higher quality resolution live stream to high bandwidth sites without creating separate video broadcasts.

To live stream meetings to an external server, follow these steps:

1Configure the external media server on the RealPresence Capture Server system and enable live streaming.

2Configure a recording template that enables live streaming.

3Configure a VRR that enables external media server.

4Record a meeting using the VRR that has the external media server enabled.

Refer to the following instructions to configure the external media servers to work with the RealPresence Capture Server system.

To configure live streams in recording template

1Go to Template > Recording Templates.

2Select a recording template.

3Click Edit.

4Select Enable Live Streaming.

5Go to Live Streaming (MP4) and select Enable H.264 High Profile for Live Streaming.

6Set the Primary Streaming Rate and Secondary Streaming Rate.

7Go to Live Streaming (WMV) and configure relevant settings.

8Click OK.

For configuration details, refer to table "Recording Template"

Polycom, Inc. 63