Polycom 40/0 manual Transcoding Task Control, To delete a media file, To view transcoding status

Media Management

•Select a transcoding template with lower bit rate, resolution, and frame rate than that of the source file.

•Click Media > Transcoding to view the transcoding status.

•Once transcoding is done, find the transcoded files under Media > Archives.

To delete a media file:

1Go to Media > Archives.

2In the archives list, select an archive.

3Click Media Files.

4Click a media file to be deleted, and then click Delete.

5Click OK, and then click Close.

Archives will be deleted permanently once you choose delete action on Admin

Portal.

Transcoding Task Control

In this section you can learn how to view transcoding status, stop an ongoing transcoding, or restart a transcodong.

To view transcoding status:

1Go to Media > Transcoding.

2In the archives list, select an archive.

3Click Media Files. Media files transcoding can have the following status:

Ready: The file can be played and downloaded.

Waiting: File waiting to be transcoded

Transcoding: File in transcoding.

Error: File with transcoding error.

Stopped: File creation stopped.

4Click Close to exit the Media Files window.

To stop an ongoing transcoding:

1Go to Media > Transcoding.

2Click a media file of the status Transcoding or Waiting, and then click Stop-transcode.

3Click OK, and then click Close.

You cannot stop transcoding files of the status Error or Stopped.

Polycom, Inc. 74