Polycom 40/0 manual Configure Windows Media Server, To configure Windows Media Server

Live Streaming

3Configure the following basic settings.

External Media Servers Parameters

Parameter	Description
Server Name	Specify the name of the external server.
Server Address	Specify the IP or DNS of the external server you selected.
Server Port	Specifies the port that the RealPresence Capture Server system uses to send
	the encoded MP4 live streams to the external server.
	Following are the default ports:
	• IIS Media Server: 80
	• Wowza Media Server: 1935
	Note: Valid port values range from 1-65536. The port number must be the
	same as set in the corresponding external media server.
	If a firewall sits between the RealPresence Capture Server system and the
	external server, make sure that rules are set to allow the two-way
	communication between the RealPresence Capture Server system and the
	external server.

4Specify whether to select Enable Live. If enabled, also configure the following settings:

Enable Live Streaming

.

Parameter	Description
Stream Protocol (for WOWZA only)	Choose between RTSP Steaming and RTMP Streaming.
Application Name	Specify the name of the external media server’s application to be used for
	the live streaming.
	Note: Contact the administrator of the external media server for the naming
	rule of the application name.
User Name	Specify the user name to access the external media server.
Password	Specify the password to access the external media server.
Test	Test whether the live streaming configurations work.

Configure Windows Media Server

You need to configure a Windows media server and your RealPresence Capture Server to work with the server as well.

To configure Windows Media Server:

1Click Windows Media Server under Server.

2Click Add.

Polycom, Inc. 65