Polycom 40/0 manual Obtain the Product Activation Key from Polycom, Restart the NFS service

Software Installation

3 Restart the NFS service.
Examples:
[root@centos-nfs ~]# service nfs restart
Shutting down NFS daemon:	[	OK	]
Shutting down NFS mountd:	[	OK	]
Shutting down NFS quotas:	[	OK	]
Shutting down NFS services:	[	OK	]
Starting NFS services:	[	OK	]
Starting NFS quotas:	[	OK	]
Starting NFS mountd:	[	OK	]
Stopping RPC idmapd:	[	OK	]
Starting RPC idmapd:	[	OK	]
Starting NFS daemon:	[	OK	]
4 Go to Configuration > Media Storage Settings and configure the settings.

Product Activation

Obtain the Product Activation Key from Polycom

A new installation of RealPresence Capture Server Virtual Edition comes with a 90-day trial license. You must activate the license shipped with your order with the product serial number (you can find this by choosing Admin > Product Activation) identified within RealPresence Capture Server.

To obtain the product activation key:

1Go to Admin > Product Activation to obtain the serial number. Write it down for later use.

2Enter the following web site address in the address bar of the web browser: support.polycom.com. and go to Support Home.

3Go to Licensing & Product Registration > Activation/Upgrade.

4Click All other Polycom Products in the pop-up window.

5Enter your e-mail address and password to log in to or register for a new account.

6Follow the page prompts step by step to generate the Key Code required for system activation.

7Enter the Serial Number you recorded and click Next.

8Follow the page prompts step by step to generate the Key Code required for system activation. Enter the product options license numbers.

9Note down the activation key (Key Code) on the page and click Upgrade.

10Go back to Capture Server Admin Portal and activate the system under Admin > Product Activation.

Polycom, Inc. 16