Polycom 40/0 manual Configure VRRs, To configure a transcoding template for WOWZA media server

Record and Playback

To configure a transcoding template for WOWZA media server:

1Go to Template > Transcoding Templates.

2Click Add.

3Select MP4 for Media Type.

4Select the WOWZA media server you configured in Transfer to Media Server field.

To edit or delete a transcoding template:

1Go to Template > Transcoding Templates.

2Click the transcoding template you want to change.

3Click Edit or Delete.

Configure VRRs

A VRR defines recording parameters. You can create a VRR basing on recording templates. A VRR is identified by digits, and you can directly start recording using a specified VRR by adding the VRR number to the dial-in number.

A default VRR, named DefaultVRR, is built in the system. When an endpoint or MCU tries to connect by dialing the RealPresence Capture Server without VRR number specified, default VRR parameters are used. You can modify the default VRR but cannot delete it.

To define a VRR:

1Go to Template > VRRs.

2Click Add.

3Configure the following settings (* indicates mandatory parameters).

VRR Parameters

Parameter	Description
VRR Name	Specify a unique name to identify the VRR. You can also use the default
	name generated by the system.
VRR Number	Specify a number to identify the VRR. You can directly dial the VRR to record
	by adding the VRR number when dialing the RealPresence Capture Server
	system. The number you entered must be unique and comprised of 4-8 digits.
	You can also use the number automatically generated by the system.
	Note: The initial digit of the VRR number cannot be zero.
Description	If necessary, you can enter additional VRR information, such as the owner
	and usage, in order to improve identification and classification management
	when there are many VRRs.
Recording Template	Specify the recording template. The template defines the basic recording link
	parameters.

Polycom, Inc. 55