Polycom 40/0 manual Same as configured under Configuration Call Settings

Record and Playback

Enable PIN

Specify whether to enable PIN code protection for the archive.

If a PIN code is set, you must enter the correct PIN code to play the live streams or archives created using this VRR.

After this option is selected, you must enter a PIN code consisting of 1-16 digits in PIN Code.

Call

Audio Only	Select this check box to define the recording for the call with this template has
	only audio capability, no matter the call rate negotiated.
Max Call Rate	Specify the maximum bandwidth that can be used by an endpoint or MCU to
	connect to the RealPresence Capture Server system for recording and live
	streaming.
Max Resolution	Specify the maximum resolution of people video that can be used to connect to
	the RealPresence Capture Server system for recording and live streaming.
Enable LPR	Once this function is selected, in case of packet loss during network
	transmission, it can effectively improve the decreased video quality caused by
	packet loss.
Indication Tone	Played to indicate that recording is ongoing, typically it is a very short beep with
	intervals between beeps, measured in second. This is enabled by default.
Media Encryption Type	If the Capture Server is licensed for call encryption, this option specifies how
	AES (Advanced Encryption Standard) encryption is enabled and SIP
	connections:
	• Required For All Calls: Enable the AES encryption for all H.323 and SIP
	calls, including video and audio only calls. This option requires the device to
	connect the system with AES enabled, otherwise, the connection cannot be
	set up.
	• When Available: Both encrypted and non-encrypted undefined participants
	can connect to the same conferences, where encryption is the preferred
	setting.
	• Off: Disable the AES encryption and SIP connections.
	Note: The Media Encryption Type available here is consistent with that set under
	Set Recording Parameters. The encryption change is applied to new calls only
	and does not impact the archive.
Max Call Length	Specifies the maximum call length for recording or live streaming calls. The
	default option is Auto (When selected, the max call length setting will be the
	same as configured under Configuration > Call Settings).
	Note: The template value set here will override the system value set under
	Configuration > Call Settings on Admin Portal.
Conference Layout (RMX 8.4 or	Specify the people layout received and recorded from MCU. The 1x1 and 1x2
higher)	layout may give focus on the speaker of the conference in the recording.
	• Auto: Automatic layout according to conference setting at RMX side to
	recording server.
	• 1x1: Single view to recording server.
	• 1x2: Dual view to recording server.
Archiving
Polycom, Inc.	49