Polycom 40/0 Configure Multicast Settings, Before You Start, To configure multicast parameters

System Configuration

Synchronize archives when storage setting	When this option is checked, the archives on the storage will be
changed	synced up with the archive record in the system database, and
	could be viewed from portal (viewer or admin). The sync-up
	action takes effect after the system restarts.
Send warning e-mail to Admin when remaining	Set a NFS storage space threshold. You can set a value in the
NFS free space reaches: (GB)	range of 10-50GB. After the system reaches the threshold,
	RealPresence Capture Server will send notifications to
	specified receivers.

3Click OK. The server restarts to apply your changes.

•If Network storage is disabled or error, RealPresence Capture Server cannot dial in and dial out.

•Capture Server supports NFS Version 2 and 3.

Configure Multicast Settings

The Polycom RealPresence Capture Server system supports the multicast function and can perform the one-to-many transmission of video streams. The system only needs to send the video streams once so that

multiple computers can simultaneously share live streaming so as to greatly reduce the demand for transmitting network video streams and save the network bandwidth.

The Polycom RealPresence Capture Server system supports the simultaneous multicast of up to 100 channels.

Before You Start

To use the multicast function successfully, the following conditions are required to be met:

●The multicast function is activated in the Polycom Capture Server system. Contact your supplier to obtain this function.

The multicast function is disabled by default.

●Routers and switches in the network of client computers are configured correctly to support the IP multicast communication with the Polycom Capture Server system.

Configure Multicast

Before you use the system to perform the multicast, it is necessary to configure parameters on the Multicast page.

To configure multicast parameters:

1Go to Configuration > Multicast Settings.

2Configure the following settings:

Polycom, Inc. 32