Polycom 40/0 manual Restart and Shut Down the System, Backup and Restore System Configuration

System Administration

Log Management

The following table shows actions administrators and auditors can perform.

Log Management

Action	Description
Refresh	Refreshes the list and adds newly generated log files.
Download	Downloads the selected log file.
Download Today’s logs	Downloads all the log files generated today.

To download log files:

1Go to Admin > System Logs.

2In the Log list, select the log to be saved.

3Click Download.

Restart and Shut Down the System

You can shut down or restart your system.

Log

Before unplugging RealPresence Capture Server, you need to shut down the server in Admin Portal.

If your RealPresence Capture Server does not restart after reboot or upgrade, you need to unplug your RealPresence Capture Server, wait for about five minutes, plug in your RealPresence Capture Server, and then reboot.

To restart the Capture Server system:

1Go to Admin > Restart/ShutDown.

2Read the risk of restart and click Restart Capture Server.

3Click OK at the prompt message.

To shut down the Capture Server system:

1Go to Admin > Restart/ShutDown.

2Read the risk of shutdown and click Shutdown Capture Server.

3Click OK at the prompt message.

Backup and Restore System Configuration

You can back up and save the system configuration of RealPresence Capture Server system to your local computer so you can restore the system configuration in case of necessary. Supported configurations include:

●Hard Disk Warning Threshold

Polycom, Inc. 78