Polycom 40/0 manual Configure QoS, Use HTTP protocol to access website, To configure OCSP

System Configuration

To configure OCSP:

1Go to Configuration > Certificate Management.

2Select Enable OCSP.

3Click OK. The system restarts to apply your changes.

You need to check Enable web client certificate validation firstly for OCSP to take effect.

Use HTTP protocol to access website

In addition to HTTPS, you can now access the website using HTTP protocol.

To enable HTTP protocol for server website:

1Go to Configuration > Certificate Management.

2Select Enable HTTP protocol for Server Website check box under Client Certificate.

3Click OK.

Configure QoS

QoS (Quality of Service) is very important in transmission of high-bandwidth audio and video data. You can use QoS to test and guarantee the following settings:

●Average packet delay

●Delay variation (jitter)

●Error rate

To specify QoS parameters:

1Go to Configuration > QoS.

2Configure the following settings:

QoS parameters

Polycom, Inc. 38