Polycom 40/0 manual Disk Usage, Reset Console Password, Reset Portal Admin Password, Reset Config

Appendix A – Console Commands

To configure DHCP IP Address for LAN 1 or LAN 2

1Choose a network interface, click OK and type Enter.

2Select DHCP Address Setup, click OK and type Enter.

3Click Set To DHCP.

4The system will show the prompt message Yes to save the configuration. Choose Yes to proceed or No to cancel.

5Click Yes if you want the system to restart to apply your changes.

After you set the connection feature or IP address for the LAN interface, the system must be restarted in order for the new settings to take effect.

6Choose DNS Server and type Enter to configure DNS server address for the system to resolve domain names.

Disk Usage

Choose Disk Usage and type Enter to view the disk space usage of RealPresence Capture Server. The total, used, and free disk space are shown.

Reset Console Password

This is to reset the console password, the system will show the prompt message to set new password to access console.

Reset Portal Admin Password

This is to reset the Portal Admin password, the system will show the prompt message to set new password to access the Admin Portal.

Reset Config

This is to reset the following system configurations to the default value:

●System Config

Call Settings

Signaling Settings

Port Settings

System time

Media Storage Settings

Multicast Settings

Certificate Management

QoS

SNMP

Active Directory

Polycom, Inc. 87