Record and Playback

Transcoding Template

After recording is done, the system will do offline transcoding according to

 

transcoding templates configured here. Multiple offline transcoding outputs

 

are allowed.

 

Note: Only qualified transcoding template will apply. If the template

 

parameters is higher than recorded raw parameters, then the template will be

 

ignored. For example, if recording raw resolution (e.g. 4CIF) is less than

 

transcoding template (e.g. 720p), then this transcoding template will be

 

ignored.

 

 

Live Streaming Server

You can check configured live streaming server information including publish

 

point template, stream alias, and streaming list.

 

 

Email Address (separated by ‘,’)

Once the live streaming is started or the VRR recorded video has completed

 

its format conversion and is ready for viewing, the system sends an e-mail

 

message to the address set here.

 

 

4Click OK.

You can click Save As to clone a VRR with the same settings.

To add publishing points for external media servers:

1Go to Template > VRRs.

2Select a VRR and click Edit.

3Click , select a live streaming server you configured.

4Enter values in the Publish Point Template field.

5Fill in an alias for this stream.

6Select a live streaming bitrate.

For external or AKAMAI media server configuration details, refer to Appendix B.

7Click .

Always click Save before clicking OK; otherwise the entered data will be lost.

8Click OK.

To edit or delete a VRR:

1Go to Template > VRRs.

2Click the VRR entry you want to edit or delete.

3Click Edit or Delete.

Start a Recording

You can start recording in RealPresence Capture Server using one of the following methods:

Call from RealPresence Capture Server to an interoperable endpoint from Admin Portal.

Call from RealPresence Capture Server to an interoperable endpoint from User Portal

Call RealPresence Capture Server from an interoperable endpoint.

Start a recording from Polycom RMX system via recording link.

Polycom, Inc.

56

Page 63
Image 63
Polycom 40/0 manual Start a Recording, To edit or delete a VRR, Click the VRR entry you want to edit or delete