Polycom 40/0 manual Configure IP Settings through Admin Portal, To set IP

System Initialization

Configure IP Settings through Admin Portal

The RealPresence Capture Server system supports both IPv4 or IPv4 & IPv6 network communications. You can configure parameters to be used for network communication, including system IP address, DNS server, and NAT server.

The RealPresence Capture Server system supports IPv6 system management.

To set IP:

1Go to Configuration > IP Settings and configure the following settings:

Set IP Parameters

Parameter	Description
Enable Network Separation	Select this check box to route the management, streaming traffic and video call
	traffic through LAN 1 and LAN 2 interfaces separately.
	This offers higher security for the signaling data.
Obtain an IP Address	If you select this radio button, RealPresence Capture Server obtains an IPv4
Automatically (DHCP)	address automatically via DHCP.
	Note: Obtaining an IP address automatically is not recommended. For best results,
	assign a static IP to RealPresence Capture Server.
Using the following IP	• IP Address: the IP address of the system.
Address	• Subnet Mask: the subnet mask of the system.
	• Default IPv4 Gateway: the address of the interface to use for accessing the IPv4
	gateway.
	• Preferred DNS Server: the preferred DNS server address for the system to
	resolve domain names.
	• Alternate DNS Server: the alternate DNS server address for the system to
	resolve domain names.
Enable IPv6	Specify whether to enable IPv6 related functions.
Obtain an IP Address	Specify whether to obtain the IPv6 address automatically using Stateless Address
Automatically (IPv6)	Auto-configuration (SLAAC).
	Note: Obtaining an IP address automatically is not recommended. For best results,
	the system should be configured with a static IP address.
Using the following IP	Select this option to manually configure a static IPv6 address:
Address (IPv6)	• Link Local Address: Specify an address for link local communication.
	Routers do not forward packets with link local addresses.
	• Site Local Address: Specify an address for site local communication.
	Routers do not forward packets with site local addresses.
	• Global Address: Specify one or several address for communication with
	external IPv6 networks. Separate several addresses with a comma (,).
	• Default IPV6 Gateway: Specify the address of the interface to use for accessing
	the IPv6 gateway.
Polycom, Inc.	20