RMX Playback RMX 8.5 or higher,  Sip

Record and Playback

If the system has not been registered to a gatekeeper, dial [RSS IP address]##[Quick Code] For example, if the IP address of the Polycom RealPresence Capture Server system is

10.1.2.3and the quick code of the file to be played back is 0123456, dial 10.1.2.3##0123456

SIP:

If the system has been registered to a SIP server, the SIP server should configure CaptureServer as a SIP peer, dial [SIP Peer Prefix][Quick code].

For example, if the SIP peer prefix of the Polycom RealPresence Capture Server system is 1234 and the quick code of the file to be played back is 0123456, dial 12340123456.

If the system has not been registered to a SIP server, dial [Quick Code]@[RSS IP address] For example, if the IP address of the Polycom RealPresence Capture Server system is

10.1.2.3and the quick code of the file to be played back is 0123456, dial 0123456@10.1.2.3

If you want to play back the second episode of the archive, you can replace the quick code in above dial string by appending episode index, such as replace 0123456@10.1.2.3 with 012345602@10.1.2.3.

•If no press on your part, it will begin playing the next episode automatically 30 seconds after the end of the previous one.

•Once the archive playback is completed, Capture Server will drop from the multipoint call within five minutes if no command is given.

•Capture Server will terminate the call five minutes after the playback is paused.

•If the capacity supports 40 recordings only, the Quick Code playback function is not supported.

Video Call Playback when Dialing out from Capture Server